How to Clean Water Based Adhesive Spills

People who use water-based adhesives can be sure that they can stand up to heat, chemicals, and water. They can also be less expensive than hot melt glues. Water-based glues are used in a lot of packaging, laminating, and labeling jobs. There are a lot of similarities between this group of glues and hot melt glues. The decision to use one or the other usually comes down to bond requirements, the type of equipment you need, and how quickly you need to make things.

With water-based adhesives, there is a risk of accidental spills, as well as the damage they can do to clothes and other things. To help you clean up adhesive spills and keep your equipment running at its best, we’re going to tell you what we know from the business.

An Overview of Water Based Adhesives

An adhesive, or glue, is a mixture that can be either liquid or semi-liquid. It is used to stick one surface to another. In general, most glues are made of polymers. They can be natural or synthetic, and they can be hard or soft. Adhesives are also made for a specific purpose, depending on the type of adhesive and the industry you work in.

An adhesive, or glue, is a mixture that can be either liquid or semi-liquid. It is used to stick one surface to another. In general, most glues are made of polymers. They can be natural or synthetic, and they can be hard or soft. Adhesives are also made for a specific purpose, depending on the type of adhesive and the industry you work in.

Water-based adhesives can be used for everything from product assembly to packaging to labeling. We have the best water-based adhesives for these and many other things. Shop for water-based adhesives online or call us for bulk pricing and ask about free samples for certain projects.

Spills Happen – How Do We Clean Them Up?

Equipment drips, adhesives spill, and things can get a lot messier. The buildup of water-based labeling adhesives can be a bother to your business. With the right cleaning aids and knowledge, you can make the process easier and speed up the time it takes to clean your home.

People who work with solvent-based glue should wear protective clothing if there is a chance of spillage, and they should also cover their work surfaces with disposable materials like newspaper or clear plastic.

How to Clean Water Based Adhesives Before They Set

So you spilled glue, here’s what to do next. Quick! Before the adhesive hardens, follow these steps to remove the adhesive and avoid any damage to the surface it is on. As long as the adhesive is still wet, sprinkle powdered borax on top of it, and the pH is on the acid side of 4.0-6.0. You can use any household cleaner made with Borax that you can buy at the store. It will peel right off the floor after Borax is put on it.

Helpful Tips:

• As soon as possible, you need to use the borax to get rid of the adhesive spill before it gets hard.
• Do this after you clean up the adhesive spill: Mix together hot soapy water and water.

How to Clean Water Based Adhesives After They Harden

Warm, soapy water can break down water-based glue. Scrub the glue off with a sponge until it comes off. As soon as the soapy water isn’t enough, put the sponge in rubbing alcohol and keep going. The alcohol breaks down the glue, which makes the glue dissolve quickly. Scrape the last of the glue off the surface with a metal scraper, then clean the surface. A towel and warm water should be used to clean the surface. Make sure that all the glue is gone.

Helpful Tips:

• If you can, try to remove the adhesive before it has set.
• Try applying the solvent on the other side of the glue spot so that it can be washed away from both sides. If the glue is on fabric, this should work.
• A cloth with loose fibers might get stuck to the glue and make the mess worse. Don’t use one.

How to Maintain your Water Based Dispensing Equipment

When you look at your rotary labeling machine, do you see a lot of glue on the pallets? When you use water-based labeling adhesives, they can build up on your equipment and make things difficult for you to do. Putting buildup on your labels, getting it on your bottles, and gumming up other parts that come into contact with pallets are some of the things that can go wrong when you pick up your labels.

As soon as dispensing equipment is slow or down, it is good to do preventative maintenance. Use a spray bottle to wet the pallets and re-moisturize the adhesive that has built up on the surface of the wood. It is recommended to clean the dispensing equipment at least once a shift to make sure it works well.