• Can bond in seconds when used with Mitreapel Adhesive Activator.
• Very fast curing time (5 – 12 seconds).
• Improved impact and shock resistance
• Perfect grab and bonding strength
• Can be used even in vertical surfaces with its designated viscosity
• Easy to apply.
The aerosol super glue accelerator provides a fine mist that is easy to control, and thanks to the viscous liquid of the glue your project won’t be a mess. Just a little bit of two part super glue will be plenty!
This cyanoacrylate accelerator is suitable for use on a variety of materials from wood to glass & stone to metal. Avoid using the cyanoacrylate glue on nonstick surfaces and polyethylene products.
Our two part CA Glue with activator will help you achieve a clean and professional result no matter what your project is. Great for industrial and personal projects, this super glue will give you the bond you need!
The simple to use instant glue will make your projects so much easier! After cleaning both surfaces, just spread the 2-3 drops of CA glue per square inch on one surface & spray the glue activator spray on the other, wait 10 seconds and then bond the pieces 5-12 seconds together.
No time to wait? With our instant bond adhesive, your project will be ready in seconds! Thanks to our special CA Glue Activator, your project will be ready in 5-12 seconds. Without the activator, cure time can take up to 2 minutes.
| Weight | 21.5 lbs |
|---|---|
| Dimensions | 13.78 × 18.90 × 8.27 in |
• 100% silicone. It cures fast. • After it is cured it does not harm fishes or other living creatures.It has very high physical resistance and a high adhesive power. • It is a single component adhesion and sealing material which is cured with the humidity in the air. • It is cured with acetoxy system. • It can be used in the environments which are constantly exposed to water.
